High-load cantilever solutions customized for heavy long-goods storage, automated logistics hubs, and pipe management across Canton Sarajevo.
An engineering whitepaper on optimizing heavy material storage in Central & Southeast European manufacturing corridors.
Sarajevo, as the economic, financial, and industrial center of Bosnia and Herzegovina, is currently undergoing a structural modernization across its key industrial sectors. Key zones such as Rajlovac, Ilidža, Vogošća, and Hadžići have established themselves as vital nodes for metal fabrication, automotive component assembly, timber processing, and construction supply manufacturing. With the ongoing expansion of the Pan-European Corridor Vc, connecting Sarajevo directly to the Port of Ploče in Croatia and Central European highways, local enterprises are experiencing unprecedented logistical velocity.
However, traditional floor storage and standard selective pallet racking present significant space bottlenecks for non-standard, long-length profile inventory. Storage density challenges in urban and peri-urban Sarajevo industrial parks require advanced overhead vertical optimization. This demand makes structural cantilever racking systems the definitive engineering standard for modern Bosnian warehouses.
Industrial operations handling extruded aluminum profiles, structural I-beams, PVC drainage tubes, timber sheets, and heavy steel coils require unobstructed linear storage faces. Traditional pallet rack front upright columns act as physical barriers, resulting in severe handling damages and low volumetric utilization.
Engineered cantilever systems eliminate front vertical columns entirely. Utilizing a central column spine with precision-tapered arms extending outward, our heavy-duty systems provide an uninterrupted horizontal storage space. This enables forklift operators in Sarajevo facilities to store long goods ranging from 3 meters to over 12 meters with zero vertical physical obstruction, increasing effective floor footprint efficiency by up to 240%.
By sourcing structural steel cantilever systems direct from our Chinese manufacturing headquarters in Dongguan, Sarajevo enterprises eliminate intermediate European distributor markup while benefiting from custom European standard engineering (EN 15512 / ISO 9001). Our direct container shipments via the Croatian Port of Ploče ensure efficient lead times and complete local custom clearance compatibility for the Federation of Bosnia and Herzegovina (FBiH).
Rigorous structural calculations built for high dynamic strain, heavy point-loads, and Dinaric seismic resistance.
Unlike light roll-formed sheet metal racks, our heavy industrial systems utilize hot-rolled structural steel I-beams (IPE profiles) or heavy-gage cold-formed C-profiles. These deliver exceptionally high yield strength (\(f_y = 355 \text{ MPa}\)), guaranteeing dimensional stability even under uneven forklift loading impact.
Cantilever arms feature a 2-degree safety pitch angle to prevent goods from sliding outward. Designed under strict strain parameters (\(L/180\) maximum deflection limits), our arms incorporate heavy pivot pins or structural bolt connections with built-in impact protection against upward crane or fork lift hits.
Canton Sarajevo is located in a seismically active zone (MSK-64 Scale 7-8). Our engineering team designs oversized footplates with multi-point high-tensile chemical anchors, calculating cross-bracing and horizontal tie loads to guarantee complete seismic compliance under local structural building codes.
| Technical Parameter | Standard Duty Specs | Heavy Duty Structural Specs | Extra Heavy-Duty Pipe/Lumber Spec |
|---|---|---|---|
| Column Heights | 2,000 mm – 4,500 mm | 4,500 mm – 9,000 mm | Up to 12,000 mm (Custom) |
| Arm Lengths | 500 mm – 1,000 mm | 1,000 mm – 1,800 mm | 1,800 mm – 2,500 mm |
| Capacity per Arm | 300 kg – 800 kg | 800 kg – 2,000 kg | 2,000 kg – 4,500 kg |
| Surface Protection | Epoxy Powder Coating (Indoor) | Thermally Baked Powder / Hot Galvanized | Hot-Dip Galvanized ISO 1461 (Outdoor) |
| Configuration Type | Single & Double-Sided | Single & Double-Sided with Guide Rails | Roof-Supported Outdoor Rack Structures |
Engineered to serve the precise physical logistics demands of local Bosnian industries.
Metal processors, CNC fabrication shops, and steel traders in Rajlovac require high load-bearing double-sided structural cantilever racks. Designed to hold long steel tubes, angle irons, I-beams, and heavy sheet bundles, these racks optimize overhead crane access and side-loader forklift efficiency.
The Bosnian forestry and woodworking industry relies heavily on efficient lumber storage. Facilities around Ilidža and Blažuj utilize our hot-dip galvanized outdoor cantilever systems with protective roof structures to store raw timber planks, MDF sheets, plywood, and PVC building trim while preventing weather degradation.
Vogošća’s booming automotive parts sub-manufacturing sector demands specialized cantilever racks equipped with removable retaining pins, plastic arm sleeves, and wire mesh decking. This allows secure, scratch-free vertical storage of long automotive exhaust lines, copper tubing, and aluminum structural extrusions.
Third-party logistics providers servicing the Sarajevo-Zenica industrial axis demand maximum system flexibility. Our tool-less height-adjustable arms (spaced at 100mm pitch increments) enable 3PL warehouse managers to rapidly reconfigure arm spacing according to shifting seasonal client storage profiles.
Direct OEM/ODM manufacturing capability with rigorous quality verification systems.
Founded in 2014, Dongguan Durack Logistics Equipment Co., Ltd. is a premier Chinese storage racking system manufacturer operating a 35,000 m² modern production facility. Backed by 12 years of core industry experience and 8 years of international export history, our company generates over $28 million in annual export revenue across Europe, North America, and Southeast Asia.
Our operational authority rests upon a strict quality assurance system using full-spectrum ultrasonic testing, weld integrity inspection, and static load stress evaluations. Overseen by 45 dedicated QC specialists, Durack caters to automated logistics hubs, major 3PL providers, and industrial distributors globally. Driven by an R&D team of 65 specialized engineers, we provide complete OEM/ODM engineering customization—including bespoke beam profiles, structural steel grades, dynamic layout designs, and specialized zinc coating finishes.
Ensuring full technical alignment with European structural directives and direct sea-land delivery.
All cantilever rack installations supplied to Sarajevo meet or exceed EN 15512:2020 structural design codes and EN 1090-2 (Execution class EXC2) for steel structures. CE marking guarantees effortless sign-off by regional safety inspectors in the Federation of Bosnia and Herzegovina.
We manage complete export freight packaging using steel banding and protective film wrap. Shipments route directly via ocean freight to the Port of Ploče (Croatia), followed by rapid rail/truck customs transit along the M17 / Corridor Vc directly into Canton Sarajevo logistics hubs.
Before fabrication begins, our 65-engineer structural R&D team provides local Sarajevo client teams with detailed 3D BIM models, DWG warehouse floor layouts, dynamic load distribution charts, and step-by-step installation manuals free of charge.
Explore our structural, single-sided, double-sided, outdoor, and heavy-pipe cantilever storage systems.
Expert responses to common technical, commercial, and logistical inquiries from buyers in Canton Sarajevo and broader Bosnia and Herzegovina.
Contact our senior structural racking engineers today for free warehouse floorplan CAD layouts, static load estimations, and direct factory container pricing.
Durack